Specifications and dimensions
- Thickness and slit width with precision tolerance and measurement method
- Slit, deburred, rounded or conditioned edge with burr and edge-wave limits
- Camber, flatness, coil inside diameter, coil mass and winding quality
Reviewed technical and procurement guidance · 10 August 2026
Aluminum Strip
Aluminum strip is narrow slit or precision-rolled flat product purchased by alloy, temper, thickness, width, edge, burr, camber, flatness, surface and coil-presentation requirements.
02Product form
Standards and supply condition
- ASTM B209/B209M for applicable coiled flat products
- EN 485 series for applicable strip tolerances and material requirements
Manufacturing and processing
- Coil is cold rolled to gauge and heat treated or strain hardened to the ordered temper.
- Precision slitting, edge conditioning, tension leveling and controlled winding establish strip presentation.
Typical applications
- Transformer winding and electrical components
- Heat exchangers, fins and automotive parts
- Closures, stampings and flexible packaging components
Quality and acceptance controls
- Verify the registered alloy and complete temper designation against the certificate and ordered product standard.
- Check dimensions, applicable tolerance table, flatness or straightness, surface class, edge and permitted defects.
- Control film, interleaving, dryness, contact materials, handling and export packing to prevent staining and damage.
Include in your RFQ
- Registered alloy and complete temper designation
- Governing product specification and unit system
- Dimensions, tolerances, quantity and grain-direction requirement
- Surface class, finish, film, edge and processing requirement
- Mechanical, conductivity, ultrasonic or other test and certificate requirements
- Packing, moisture protection, destination and delivery term
Selection limits
- Electrical use requires conductivity and joint-design controls in addition to alloy and temper.
- Slit-edge quality and burr acceptance must match the downstream stamping or winding equipment.
10 August 2026
Sources and technical review
RFQ support
Aluminum Strip
Aluminum strip is narrow slit or precision-rolled flat product purchased by alloy, temper, thickness, width, edge, burr, camber, flatness, surface and coil-presentation requirements.