Reviewed technical and procurement guidance · 10 August 2026

5052 Aluminum Coil

Procurement guide for 5052 aluminum coil covering full temper, gauge, width, coil geometry, surface, forming, corrosion context, inspection and protective packing.

03Grade-product

Specifications and dimensions

State alloy, complete temper, thickness, width and applicable tolerance table for the ordered thickness range.
Define coil ID/OD, maximum mass, winding direction, telescoping, camber, flatness and edge condition.
Specify mill, brushed, anodizing-quality or coated surface; protective film/interleaving and grain direction where relevant.

Standards and supply condition

ASTM B209/B209M for applicable aluminum-alloy sheet supplied in coils
Aluminum Association alloy and temper designation framework

Manufacturing and processing

Slab is homogenized, hot rolled and cold rolled before annealing or strain hardening to the ordered temper.
Slitting, trimming, leveling, cleaning, surface treatment, film application and controlled winding complete the coil order.

Typical applications

Marine and transport sheet-metal fabrication after design review
Enclosures, HVAC, appliance and general formed components
Architectural and corrosion-resistant sheet applications

Quality and acceptance controls

Verify registered alloy, full temper, cast/coil identity and mechanical results against the certificate.
Measure thickness profile, width, camber and flatness using the ordered product-standard method.
Inspect water stain, oxide, scratches, roll marks, edge damage, telescoping and winding quality.
Validate forming, paint/adhesive, anodizing or welding compatibility on representative material when critical.

Include in your RFQ

Exact grade or alloy designation and governing product-standard edition
Product form, manufacturing route and ordered delivery condition or temper
Nominal dimensions, tolerances, length/coil geometry and quantity
Surface finish, edge/end condition, straightness/flatness and permitted defects
Fabrication, forming, machining, welding and heat-treatment requirements
Mechanical, corrosion, coating or application-specific acceptance tests
Inspection document, heat/lot traceability, marking and third-party inspection
Packing, preservation, destination, Incoterms and required delivery date

Selection limits

5052 strength and formability depend on full temper and thickness; H32, H34 and O are not interchangeable.
Alloy and temper do not define anodizing appearance, paint adhesion, flatness or surface acceptance.

10 August 2026

Sources and technical review

ASTM B209/B209M Aluminum and Aluminum-Alloy Sheet and Plate

ASTM International · B209/B209M-21 scope; ordered edition controls

Aluminum Standards and Alloy Designation Systems

The Aluminum Association · Standards overview, reviewed July 2026

Independent grade guide

5052

Review chemistry, properties, corrosion behavior, and material-selection context for this grade.

Independent grade guide →

RFQ support

5052 Aluminum Coil

Procurement guide for 5052 aluminum coil covering full temper, gauge, width, coil geometry, surface, forming, corrosion context, inspection and protective packing.

Discuss sourcing from China