Technical guide · 2026-08-03
55% Al-Zn / Aluzinc Coated Steel
55% aluminum-zinc alloy-coated sheet is produced continuously and combines a distinct Al-Zn coating with a steel substrate. It differs from zinc galvanized sheet in coating chemistry, cut-edge behavior, heat reflectivity and compatible paint/processing practice; Galvalume is a trademarked name in some markets.
01
Definition and boundary
Do not transfer coating designations, thickness assumptions or warranties between batch, continuous, electrolytic and prepainted processes.
Reference information only: final acceptance is controlled by the ordered product specification, condition, dimensions and certified test results.
02
How the material system works
Coating process determines coverage, alloy layer, surface and applicable designation.
Barrier protection and zinc-based sacrificial action depend on coating type, amount and damage geometry.
Forming, cutting, welding, storage and environment alter the delivered coating system.
03
Representative grades and systems
| Grade or system | Selection focus | Qualification |
|---|---|---|
| ASTM A792 AZ50 | Lower Al-Zn coating-weight designation for defined applications. | Verify the ordered product specification, condition and dimensions before substitution. |
| ASTM A792 AZ150 | Common metric Al-Zn coating-mass designation for building products. | Verify the ordered product specification, condition and dimensions before substitution. |
| EN 10346 AZ | European Al-Zn coated flat-product designation system. | Verify the ordered product specification, condition and dimensions before substitution. |
04
Properties and trade-offs
Coating designation must be interpreted under its own standard and unit system.
Durability is a system outcome, not a fixed property of the trade name.
Surface treatment and paint compatibility affect forming, storage and service.
05
Product forms and supply conditions
06
Applications and selection
Applications and selection
- Roofing, cladding and building envelope systems
- Automotive, appliance and formed industrial panels
- Infrastructure, agricultural, utility and general fabrication
Properties and trade-offs
- Define exposure, design life, appearance and maintenance plan.
- Choose coating process before coating designation and substrate grade.
- Detail edges, fasteners, drainage, contacts, welding and repair.
07
Fabrication, durability and inspection
Use roll-forming and joining parameters qualified for the complete coating stack.
Repair damaged coating and weld zones with a specified compatible method.
Prevent wet-storage stain through dry, ventilated handling and packaging.
08
Procurement checklist
- Specify steel substrate, strength/forming class, metallic coating type and mass/thickness designation.
- For prepainted products, define pretreatment, primer, top/back coat, dry-film thickness, color/gloss and exposure.
- State surface treatment, passivation/oiling, inspection, packing, moisture protection, traceability and warranty basis.
09
Standards, sources and review
Standards and designation context
- Applicable ASTM/ISO/EN coating product specification
- Substrate mechanical and forming-grade requirements
- Project paint, corrosion, fabrication, inspection and warranty specification
Authoritative research sources
American Galvanizers Association · ASTM specification guide, accessed 2026
GalvInfo Center / International Zinc Association · Technical bulletin collection, accessed 2026
GalvInfo Center / International Zinc Association · Coated-sheet standards index, accessed 2026